banner



Home  ›  How To Change From Ubuntu To Windows

How To Change From Ubuntu To Windows

Written By Thursday, May 26, 2022 Add Comment Edit

Download Article

Download Article

This wikiHow teaches you how to install Windows 10 on a PC that's already running Ubuntu Linux. Before you go started, brand certain you've already purchased a Windows license and product key. Don't worry if you lot don't accept Windows install media, as you can create a bootable USB bulldoze from a downloadable ISO image. Once you lot've installed Windows, you lot can install a tool chosen EasyBCD that allows you to switch betwixt operating systems at reboot fourth dimension.

  1. one

    Install Gparted if you haven't already. Gparted is a complimentary sectionalisation tool with a graphical user interface that'south pretty easy to utilise. Yous can download it from the Software Center or by running sudo apt-get install gparted from the control line.

    • If you lot've already created a sectionalisation for Windows but information technology's non a Primary Partition, you lot'll have to create a new i.[ane]

  2. ii

    Open up Gparted. You'll run across a list of all drives and partitions.

    Advertisement

  3. 3

    Right-click the partition or drive yous want to edit and select Resize/Move . This allows you to create a new partition from an existing 1.

  4. 4

    Enter the new partition size (in MB) into the "Gratuitous space following" bare. Yous should allocate at least 20 GB (20000 MB) for Windows 10. If y'all plan to install apps and use Windows regularly, you lot'll probably want to increment that amount.[ii]

  5. 5

    Select Primary Partition from the "Create every bit" carte. It's on the right side of the window.

  6. 6

    Select ntfs from the "File System" menu. Information technology'due south on the right side of the window.

  7. 7

    Type Windows10 into the "Label" field. This is just so y'all can easily place the division.

  8. viii

    Click Add . It's at the bottom-right corner of the window.

  9. 9

    Click the green check mark button. It's in the toolbar at the pinnacle of Gparted. This creates the partition, which may take a little while. When the partition is set up, click Shut at the bottom-right corner of the window.

    10. Advert

  1. i

    Install UNetbootin from the Software Centre. This is a free application that lets you create a bootable USB bulldoze in Ubuntu. To learn more well-nigh UNetbootin, see https://unetbootin.github.io.

    • Y'all'll demand either a blank USB drive with at least 8 GB of space to create install media. Any data on the USB bulldoze will be erased during this procedure.[3]
    • For help installing software on Ubuntu, run across How to Install Software in Ubuntu.

  2. 2

    Go to https://www.microsoft.com/en-us/software-download/windows10 in a web browser. If yous don't already take a bootable Windows DVD or USB drive, you lot can create a one from a downloadable ISO.

    • You must have a license to install Windows 10. This means you should have already purchased Windows 10 and accept a valid production primal.

  3. 3

    Select the latest version of Windows ten and click Confirm . Additional options will expand at the lesser of the page.

  4. 4

    Select a linguistic communication and click Confirm . Yous'll choose the linguistic communication from the drop-downwards bill of fare below "Select the product linguistic communication."

  5. 5

    Click 32-scrap Download or 64-scrap Download . This downloads the ISO to your default download location.

  6. 6

    Open UNetbootin and insert your USB drive. Opening UNetbootin displays the welcome screen where you can choose your bootable bulldoze parameters.

  7. vii

    Select the "DiskImage" radio push. It'south toward the bottom-left corner of the window.

  8. viii

    Select ISO from the "DiskImage" carte. It's to the right of the radio push button.

  9. 9

    Click the three-dot … push button. This opens your file browser.

  10. x

    Select the file you simply downloaded from Microsoft. It's the one that ends with .iso.

  11. 11

    Select USB Bulldoze from the "Type" menu. It's at the bottom-left corner of the window.

  12. 12

    Select your USB drive from the "Drive" menu. This is the device label for your USB drive.

    • If yous can't select your USB drive, it probable needs to be formatted to the FAT32 file system. You tin exercise this in the file manager past correct-clicking the USB drive and selecting Format.[4]

  13. 13

    Click OK . This creates a bootable Windows ten USB drive from the downloaded ISO image. Once the drive is ready, you'll see "Installation Complete."

  14. 14

    Click Exit to close UNetbootin.

    15. Advertizement

  1. 1

    Restart your figurer into the BIOS/UEFI. The steps to enter the BIOS/UEFI depend on your PC manufacturer and model. You lot'll commonly accept to press a certain key (often F2 , F10 , F1 , or Del ) correct afterwards the estimator starts boot up.

    • Insert the USB drive into a free USB port if you haven't already.

  2. two

    Set the USB drive to come starting time in the boot order. You'll ordinarily do this in a card chosen "Kicking" or "Boot Club." The steps to practice this vary by PC, just you'll usually have to select USB Drive and mark information technology as 1st Boot Device. Check your PC manufacturer's website for more specific instructions well-nigh your BIOS/UEFI.

  3. 3

    Save your changes and exit the BIOS/UEFI. Most BIOS/UEFI make the "Save" and "Go out" keys very clear somewhere on the screen. Once you exit the BIOS/UEFI, your calculator volition boot from your USB bulldoze and display the "Windows Setup" window.

  4. 4

    Click Custom: Install Windows simply (advanced) . It'south the second option on the window. A list of partitions will appear.

  5. v

    Select the Windows10 sectionalisation and click Next . This is the division you just created. Windows will now install on the selected partition.

  6. 6

    Follow the on-screen instructions to install Windows. One time yous finish the setup, you'll boot to the Windows desktop.

  7. 7

    8. Ad

  1. i

    Open up the Microsoft Border web browser. You'll find it in Start menu, which is at the bottom-left corner of the screen. The final part of the process is setting up your computer to permit you boot from either Windows 10 or Ubuntu at start up.

  2. 2

    Navigate to https://neosmart.net/EasyBCD. EasyBCD is a free tool that lets you lot set up dual-boot from inside Windows.

  3. 3

    Coil down and click Register under "Non-commercial." This brings you to a sign-up page.

  4. 4

    Enter your proper noun and email address and click Download . This should start the download immediately, but you might accept to click Salve or Download to confirm.

  5. 5

    Click the file you just downloaded. It's the file that starts with EasyBCD. Y'all should see it near the bottom of the browser. If yous don't, printing Ctrl+J to open up the Downloads list and click it there.

  6. six

    Click Aye to allow the app to run.

  7. 7

    Follow the on-screen instructions to install EasyBCD. Once the app is installed, it will exist added to the Kickoff carte du jour.

  8. viii

    Open EasyBCD. It'southward on the Start card, which you can go to by clicking the Windows button at the lesser-left corner of the screen.

  9. 9

    Click the Linux/BSD tab. It's near the top of the app.

  10. ten

    Select Grub ii from the "Type" carte du jour. It'due south virtually the top of the tab.

  11. 11

    Type Ubuntu into the "Name" field. It'due south right below the "Blazon" menu. This is how Ubuntu volition appear in the boot menu.

  12. 12

    Select Automatically locate and load from the "Drive" menu.

  13. 13

    Click the Add together Entry button. It'due south correct below the "Drive" card. This adds an option for Ubuntu to the standard Windows kicking card.[5]

  14. fourteen

    Remove the USB bulldoze and restart the PC. Yous can restart the PC by clicking the Start menu, selecting the Power push button (it looks like a knob), and choosing Restart. When the PC comes back up, it will boot to a screen that allows y'all to select either Windows ten or Ubuntu. Selecting i or the other will kick into that operating organization.

    15. Advertisement

Inquire a Question

200 characters left

Include your electronic mail address to get a bulletin when this question is answered.

Submit

Advert

Most This Article

Article Summary X

ane. Create a primary NTFS sectionalization in Ubuntu.
2. Download the Windows 10 ISO from Microsoft.
3. Install UNetbootin from the Software Eye.
4. Use UNetbootin to create a bootable USB Windows x bulldoze.
v. Boot from the USB drive.
6. Follow the on-screen instructions to install Windows.
7. Connect to the internet and download EasyBCD.
8. Utilize EasyBCD to add Ubuntu to the kicking menu.

Did this summary help you?

Thanks to all authors for creating a page that has been read 182,247 times.

Is this commodity upward to date?

Source: https://www.wikihow.com/Install-Windows-from-Ubuntu

Posted by: whipplemintwoubity.blogspot.com

0 Response to "How To Change From Ubuntu To Windows"

Post a Comment

Subscribe to: Post Comments (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel